SpectynCNC MACHINED PARTS, ALWAYS TO SPEC

Prototype to production · Utah

Prototype and production CNC machining in Utah.

Spectyn is a CNC machine shop in Utah that takes a part from a quick R&D prototype to a full production run. Prototype jobs use conversational programming on the shop's prototype machines, and production jobs get full CAM programming on its production machines, so each job is programmed the way its quantity calls for.

Get a quote

Why it matters

One prototype and a production run are different jobs

A single R&D part and a repeat run of the same part can come off the same drawing, but they don't belong in the same setup. A prototype needs to be programmed and cut quickly so the design can be tested and changed. A production run needs a program and setup that can be repeated part after part and run again when the next order comes in.

Spectyn handles that by programming each job the way its quantity calls for. Quick R&D parts are programmed conversationally on the shop's prototype machines, without waiting on a full CAM program. Production work gets full CAM programming on the production machines. Which route a part takes is decided after reading your drawing and hearing how many you need, not promised on this page.

Two ways a job runs

How prototype and production work split

Prototypes and R&D

One part or a handful, often while the design is still changing. Conversational programming on the prototype machines and the full manual tool room keep these jobs moving, and a new revision can be cut without rebuilding a production setup.

Production runs

A larger quantity, or a part that will be ordered again. Full CAM programming on the production machines sets the job up to be repeated. The floor also includes a bar feeder on the Hyundai-Kia lathe for turned parts that run in quantity.

Moving from one to the other

When a prototype is approved and the order grows, say so. The shop can look at moving the part from a prototype setup to a production program and machine.

Equipment for this kind of work

The machines on the floor

The full list, with photos, is on the Capabilities page. Milling and turning each have their own page: CNC milling in Utah, CNC turning in Utah, and 5-axis CNC machining in Utah. For inspection and how the shop approaches tight work, see precision CNC machining in Utah.

  1. Makino A51 horizontal machining center
  2. QuickTech S-42 9-axis mill/turn
  3. Fadal 4020 (×2) and Fadal 3016 (×3) vertical mills
  4. Feeler VMP50A vertical mill
  5. Hyundai-Kia STK21LMS lathe with bar feeder
  6. Victor 1840 DCL (×2) and Victor 1640S lathes
  7. Acra 5V CNC mill with MillPWR and a Sharp 9 by 42 inch LMV vertical mill
  8. A full manual tool room
  9. An inspection room with a Brown & Sharpe Microval 343 manual CMM and a Mitutoyo optical comparator

Who sends this work

The fields Spectyn works in

Prototypes and production parts come from every industry Spectyn serves: medical, aerospace and defense, robotics, automotive, electronics, and industrial equipment.

Sending a job

What helps the shop answer quickly

Start with the quote form. It has one box for prints and documents and one for solid models, with up to 10 files and 15 MB total per request. The shop replies by email.

  1. The drawing and a model

    The drawing shows which features and dimensions are critical. A STEP file helps the shop program the part, whether it's a prototype or a production job.

  2. Quantity, now and later

    Say how many you need now and whether you expect to order more. That is what decides between a prototype setup and a production program.

  3. The revision and the material

    Prototypes often change. Say which revision is current and what the material callout is, including any finish the drawing requires.

  4. What inspection you need back

    If you need specific measurements or a report with the parts, say so up front so it is part of the agreed scope.

Questions

About prototype and production work at Spectyn

Do you take one-off prototype orders?

Yes. Quick R&D parts are what the prototype machines and conversational programming are for. Send the drawing and say how many you need.

Can you run production quantities?

Yes. Production jobs get full CAM programming on the production machines. Whether a specific quantity and timing fit is answered after the shop reads your drawing.

Where in Utah is the shop?

Spectyn is in Utah. A street address is not published on this site. Use the quote form and the shop will reply by email.

What tolerances, lead times, and certifications does the shop hold?

Those are not listed on this page. Send the drawing, and the reply will say whether the shop can hold what it calls for and when the parts can be ready.

Next step

Have a prototype or a production part?

Attach the drawing and model, say how many you need now and later, and Spectyn will reply by email.

Get a quote