SpectynCNC MACHINED PARTS, ALWAYS TO SPEC

Precision machining · Utah

Precision CNC machining in Utah.

Spectyn is a precision CNC machine shop in Utah making milled and turned parts for medical, aerospace and defense, robotics, and other industrial work. The shop pairs horizontal, vertical, and multi-axis machines with an inspection room, so parts are measured in-house before they ship.

Get a quote

What precision means here

Parts made to your drawing, then checked against it

Precision machining comes down to two things: cutting the part the way the drawing calls for, and proving it with measurement. Spectyn does both under one roof. Parts are programmed and cut on the shop's CNC mills and lathes, then checked in the inspection room on a Brown & Sharpe Microval 343 manual CMM or a Mitutoyo optical comparator.

This page doesn't list tolerance numbers or certifications. What a specific part needs is read from your drawing, and the reply to your quote request says whether the shop can hold it.

How the work is done

Machining, programming, and inspection

Milling and multi-axis work

A Makino A51 horizontal machining center, a QuickTech S-42 9-axis mill/turn, and a row of Fadal and Feeler vertical mills cover prismatic parts and complex multi-sided features. See CNC milling in Utah and 5-axis CNC machining in Utah.

Turning

A Hyundai-Kia STK21LMS lathe with a bar feeder handles turned parts in quantity, alongside Victor 1840 DCL and Victor 1640S lathes. See CNC turning in Utah.

Inspection in-house

The inspection room has a Brown & Sharpe Microval 343 manual CMM and a Mitutoyo optical comparator. If you need specific measurements or a report with your parts, say so in your quote request.

Equipment for precision work

The machines on the floor

The full list, with photos, is on the Capabilities page.

  1. Makino A51 horizontal machining center
  2. QuickTech S-42 9-axis mill/turn
  3. Fadal 4020 (×2) and Fadal 3016 (×3) vertical mills
  4. Feeler VMP50A vertical mill
  5. Hyundai-Kia STK21LMS lathe with bar feeder
  6. Victor 1840 DCL (×2) and Victor 1640S lathes
  7. Acra 5V CNC mill with MillPWR and a Sharp 9 by 42 inch LMV vertical mill
  8. A full manual tool room
  9. An inspection room with a Brown & Sharpe Microval 343 manual CMM and a Mitutoyo optical comparator

Who sends this work

Industries that need precise parts

Spectyn machines parts for medical, aerospace and defense, robotics, automotive, electronics, and industrial equipment work. Jobs range from one prototype to repeat production; see prototype and production CNC machining in Utah. To order a part made from your own design, see custom CNC machined parts in Utah.

Sending a job

What helps the shop quote a precision part

Start with the quote form. It has one box for prints and documents and one for solid models, with up to 10 files and 15 MB total per request. The shop replies by email.

  1. A fully dimensioned drawing

    Mark which features and dimensions are critical, with their tolerances and any geometric callouts.

  2. A solid model

    A STEP file helps the shop program the part accurately.

  3. Material, finish, and quantity

    Give the material callout, any finish the drawing requires, and how many you need now and later.

  4. The inspection you need back

    If you need specific measurements or a report with the parts, say so up front so it is part of the agreed scope.

Questions

About precision machining at Spectyn

What tolerances can you hold?

Tolerance numbers are not listed on this page. Send the drawing, and the reply will say whether the shop can hold what it calls for.

Do you inspect parts in-house?

Yes. The shop has an inspection room with a Brown & Sharpe Microval 343 manual CMM and a Mitutoyo optical comparator.

Where in Utah is the shop?

Spectyn is in Utah. A street address is not published on this site. Use the quote form and the shop will reply by email.

What lead times and certifications does the shop hold?

Those are not listed on this page. Send the drawing, and the reply will say when the parts can be ready.

Next step

Have a precision part to quote?

Attach the drawing and model, mark the critical features, and Spectyn will reply by email.

Get a quote