Medical · CNC machine shop Utah
Medical CNC machine shop in Utah, cutting to the drawing and revision you send.
Spectyn is a machine shop in Utah that machines parts for medical device and equipment work. Buyers send the print; the shop figures out how the part is held, cut, and checked from there. Material, quantity, and what finished means are agreed before metal is cut.
Why medical buyers use a shop
The print and the revision decide the job
Medical parts are rarely hard because of one hole. They are hard because features on different faces have to relate to each other, and because the revision on the drawing is the one that has to get cut — not an older file someone still has open.
A CNC machine shop in Utah that reads the drawing before promising anything saves time on both sides. Spectyn does not invent a process for your part on this page. The shop looks at what you send, says whether it can take the work, and settles scope before the first chip.
That same habit shows up across the other fields on the Industries page. Medical work sits next to aerospace & defense, robotics, automotive, electronics, and industrial equipment — each with its own kind of part, same rule about the print.
Equipment for this kind of work
Machines that tend to matter for medical parts
The full list is on the Capabilities page. These are the ones most often tied to medical device and equipment parts with features on several faces.
- QuickTech S-42 9 Axis Mill/Turn for 5-axis parts that can be completely finished in the machine
- Makino A51 Horizontal
- Fadal 4020 (×2) and Fadal 3016 (×3) vertical mills
- Feeler VMP50A Vertical
- Brown & Sharp Microval 343 Manual CMM
- Mitutoyo Optical Comparator
How a job starts
Drawing, reply, then agreed scope
There is no published turnaround on this page. Timing belongs to the job you send. The short version of How a job starts is below; use the inquiry form to begin.
-
Send the work
Describe the part, how many you need, and when you need them. A STEP file and the drawing make multi-face medical parts much easier to judge.
-
Get a direct reply
Spectyn reads that job and answers with questions, or with whether the shop can take it. Files can come back on the email thread.
-
Agree the scope
Material, quantity, revision, and what finished means are settled before metal is cut. If you need specific inspection back with the parts, say so up front.
Questions
About medical work at Spectyn
Does the shop claim medical certifications on this page?
No. Certifications and tolerances are not listed here. Send the drawing, and the reply will say whether the shop can hold what it calls for.
Can multi-axis medical parts run on the QuickTech?
Some can. The QuickTech is for 5-axis parts that can be completely finished in the machine. Other parts run on the Makino, the Fadal and Feeler mills, or the lathes. Which path a part takes is decided for that part. See 5-axis CNC machining in Utah.
Where in Utah is the shop?
Spectyn is in Utah. A street address is not published on this site. Use the contact form and the shop will reply by email.
Next step
Have a medical part?
Describe the part, the quantity, and when you need it in the inquiry form. Spectyn replies by email, and the drawing and model can be sent on that thread.